admin

Mutators are a series of effects pedals I’ve been working on for a little while. A Mutator is, at it’s core, the circuit from a toy voice changer used as an effects pedal. I’m not the first one to do this by a long shot, but I build them more like real guitar pedals, which I haven’t seen anyone else doing so far.

One thing I want to say right now before I go any further is that these pedals are NOISY. They are not high quality/expensive pitch shifters, or ring mods with no carrier bleed. They pretty much destroy the tone of anything you run through them (in a good way IMHO). Also, when you aren’t playing with the effect on you will get the “background noise” (barely audible hissing, and osc bleed through) from the circuit. These circuits also have a built in gate, so when you play a note the pedal while shut it off when it decays to a certain point (cuts the sustain of the note). I’ve tried putting a booster in the front end of the pedal to help with this, but you could just run a distortion in front of it for the same effect.

Mutator features/options
Mutators in most cases get re-housed into a stronger (metal) housing. I add quality 1/4 inch input and output jacks, and a true bypass stomp switch with indicating LED. They almost always run on a 9v battery, and get a new, better 9v connector. I replace the sound selection switch with a new stronger switch to go between the sounds on the voice changer (usually “Spaceman, Ghost, Alien, Robot”, etc) There are usually 3 different sounds to choose from, so there is a three position switch on the Mutator. I’ve been able to do this with toggles, and rotary switches, so let me know if you have a preference. Next I add a knob that controls the “pitch” of the sounds. These things sound pretty wild just running something through them un-modified, but playing with this knob, and you get some really unusual sounds. This pretty much covers the “Basic” Mutator setup. Average price for one with these controls is about 80.00 dollars.

If the “basics” isn’t enough knobs for your knob twiddling pleasure I’ve come up with several more mods to these pedals.

The first one is the easiest, a Volume knob. Simple, but useful. If that’s the only option you want on a “basic” then ask me nice, and I’ll likely put it on for free.

Next is a Gain knob or switch (depends on the circuit). It cranks up the volume and adds more distortion to the sounds. Quite brutal!

Third is an Oscillation effect. This adds a sqaurewave osc to the sound of the pedal that has controllable pitch with a knob, and an on/off switch for the effect. Very thick and synthy, but of course adds to the overall noise of the pedal.

Fourth is a Feedback control. Much like a Feedback Loop pedal I feed the output of the pedal back into it’s input through a knob, and a on/off switch. Modulations galore!

Another feature I’ve added is a Starve feature. This literal turns down the amount of power that the internal audio chips are getting. It does pretty much what you would expect it to do, noisy degradation of the audio with major gating. Controlled with an on/off switch, and knob.

On several pedals like this I’ve added the ability to control an effect with a light dependant resistor. What the LDR does is change the pitch when something shadows the amount of light going to it (be it your hand, or toe of your shoe). The more light it sees the higher the pitch, the less it sees the lower the pitch (generally, but there are exceptions). Controls are a switch and LDR.

These controls will run at about 120 to 140 depending. These are also very dependant on how the circuit behaves, one mod might work, while another doesn’t. Another thing to add to this part is stomp switches. I can setup any of these features to be activated with a stomp switch+indicating LED so you don’t have to bend down while playing to turn it on. This of course adds to the cost because stomp switches are pricey.

Added Circuity
Now we get to some more advanced stuff where I actually add circuitry to the pedal. As stated above I have put booster in front of the circuit to boost the signal above the gate for a longer sustain. This could have a gain control on it, or could just be set at a static amount of gain.

Next is the addition of an LFO to modulate the pitch. This will effect the sound of the pedal everytime the LFO cycles giving it a rhytmic pitch shifting character not unlike some of the old modular synths. Controls are an on/off switch, rate knob, and (sometimes, depends on the circuit) rate indicating LED.

I have a few more ideas for this that I haven’t tried yet. One is a triangle shaped LFO to cause swelling up and down pitch changers similar to a phaser. The other is an envelope tracking circuit that will change the pitch with the strength of the guitar/whatever’s signal.
These mods run 140 and up depending on what else you would like to have.

Here’s some of the Mutators that I’ve already built. All are already sold unless otherwise indicated. Scroll down to the bottom for the most current builds.

This is the first mutator I built. I decided to leave it in the megaphone housing because I had room for the input, and output jacks. Both of the jacks muted the speaker, and microphone respectively. I also added a switch that would lock the trigger switch in the “on” position. I added a course, and fine mutation control, and body contacts that modulated the effect. This Mutator has been sold.

The second mutator I built I housed in an old Radio Shack computer toy. I set this up to be a “table top” effect for the Noise crowd. When looking at the circuit I noticed that it had an LM386 in it for amplification. I knew that was a common chip for guitar effects, so I used some of the tricks I learned from Colin of Experimentalists Anonymous. Colin has a pedal he builds based off of the LM386 called the Parallel Universe that has a gain and osc. feature. Based off of Colin’s schematics I was able to add these effects to this Mutator. The controls on this Mutator were On/Off switch, True Bypass switch, 3 way Mutation selection switch, Osc. on/off switch, Volume knob, Gain knob, Mutation knob, Osc. Freq. knob. This Mutator has been sold.

The 3rd Mutator I built was the first that was setup like a guitar effect box. I housed it in a the box for a piece of test equipment (the box is HUGE). I set it up with a true bypass stomp switch, 3 way switch to select the different sounds,gain, mutation, and osc. frequency knobs, and a stomp switch to turn the osc on/off. There are bright orange LEDs inside the box for the bypass, and osc switches that shine out the sides. This Mutator has been sold.

This is the 4th Mutator I’ve built. I housed it in an old box marked “High Voltage” (pretty cool!). This one has a true bypass stomp switch, volume, gain, mutate, and strave knobs, 5 switches to select different sounds, and a stomp switch to turn the strave feature on/off. There are 2 bright orange LEDs that indicate bypass, and starve on/off. This Mutator has been sold.

This is the 5th Mutator I’ve built. This one is housed in the control box for an old fog machine. This one has a true bypass stomp switch, gain, mutation, and feedback knobs, an on/off for the feedback, and a rotary switch that selects the different sounds. The red, white, and blue lights on top indicate bypass state, and the orange light indicate feedback on/off. This Mutator has been sold.

I built this Mutator for Opsysbug. It has the usual Mutator controls, plus an LFO feature that stutters the mutation in a rhythmic pattern. The LFO has a rate knob and on/off switch. This Mutator has been sold.

A throw back to the first mutator. This one has the the mutate knob, body contacts that have the same effect as the mutate knob mounted in the handle, feedback switch, gain switch, trigger lock switch (keeps it on), and switching 1/4” input and output jacks. Click on the picture for a sound sample. This mutator is sold.

This Mutator is similar to the IV. It has mutilple switches to select the different sounds, Gain/volume knob, and Course and fine mutation controls. It’s mounted in an old relay box of some sort. This Mutator has been sold.

Housed in one of the cooler enclosures I’ve ever recycled, this mutator has a Volume knob, Mutation switch and pitch knob, and a feedback knob. It has a true bypass stomp switch, bright blue LED, and runs on a 9V battery. It is currently for sale for 100.00 plus shipping. This pedal has sold.

I’m all done straightening up pages. Probably have a few links to fix as I find them.

Hoping to add some new content once I get some photos and such uploaded. Stay tuned! Same Bent Time, Same Bent Channel.

 This site has needed straightened up for quite sometime, and I’m a little more then half way done. Working on slimming it down to make room for new content and projects.

  You can navigate to different pages through the side bar as always, and I’m working on setting up better links in the pages that follow. Hope to have it all done by this weekend.

 -Kevin

Here

Extensive in process photos here

It was fun. Can’t wait for next time.

-Kevin

Well it’s all over. 3 friends came over and got their first taste of circuit bending. My initial target “Alphy” the alphabot ended up being a dud, so I went and got a Bloo’s Clues toy was successful with that. Here’s a video with 3 of the 4 that were complete.

 I’ll do more of a write up later, I just wanted to get this up here for the contest.

 -Kevin

Small update + some interestingness.

 Been posting new creations on ebay lately. Also working on finishing up a big project, and an old one that I literally had to dust off before finishing (more of a mod then a bend).

I’ve decided to accept the “Circuit-Bending Challenge” put forth by Circuit Master from GetLofi and createdigitalmusic. See links for more info, but basically on Oct. 28th I’m going to get a bending target, bend it while documenting progress, and post the results up on the internet all in the same day.

Be sure to stay tuned, same bent-time, same bent-channel.

-Kevin

Couple new things.

We have a Youtube that you can see all the latest bentstruments in action.
See it here

And now there is a myspace for the site.
See it here.
If you have bought something for me, or are interested in what I do, be sure to come and friend me so that you can get updates on anything new I might be doing.

I can’t believe how long it’s been since I’ve done anything on this site (or any Mad Science period). I’m working on getting things going again, working on getting the lab more workable, and some changes to the site. Please excuse the google ads, not put there by me. I’ve added a couple of links on to the side bar so that people will still be able to get to the info about my work, and contact me if they are interested in a custom instrument. I will hopefully be adding more info on what I’ve been working on in the last 6 months soon.

Ta for now.

11/22/06

Added a small bending guide to the Musini Page

11/17/06

Added more to the “Mutator” effects pedal page here. I also made a new page dedicated to my work in effects pedals. I’m hoping to start building my own pedals under the name “Foot” Pedals.

11/12/06

Wow, it’s been a while. I have a ton of things to show you, just hope I have the time to add it all. Thus far I’ve added a page to keyboards talking about my work adding LFOs to toy keyboards here, and I’ve added a little blurb about my most recent SK-1 bend here.

6/28/06

Man, have I been busy. I’ve been working on controlling toys with external oscillators with some relatively pleasing results. More pages on that later. Right now I would like to introduce you to Musini Proto.

6/3/06

Added another keyboard to the keyboards page. Also check out this ad made by Igor Amokian (Chris Wild).

5/29/06

Working on making pages for all the keyboards I’ve done. You can see the index here.

5/28/06

Added a new page for my Mutator Effects Pedals. Check’em out!

4/26/06

Check out this video of Shawn from Child Bite using his custom built Charaxylo.

3/24/06

Added The Tape Project to the Instruments page.

2/7/06

Look out for new additions to the instruments page. I’ve recently gotten addicted to guitar pedal building and modifing, so I hope to have some pages about that up soon also.

I’ve made a decision to take some steps to advance my knowledge of electronics, so be on the look out for more advance gadgetry in the not to distant future.